Author Topic: Changing Access Control Schedule for Doors  (Read 1492 times)

Alex Allen

  • Administrator
  • Full Member
  • *****
  • Posts: 1234
    • View Profile
    • Stop My Theft
Changing Access Control Schedule for Doors
« on: November 13, 2014, 12:40:58 am »
Dear Valued Clients,
If you are up for the challenge here is a howto in programming your doors. Of course EPS will do this for you, we need your store Holidays and at least 2 hour heads up on door schedule change. I will post a Holiday How To in the coming weeks. I have included a link to the manual below for your convenience.

As always, it is a pleasure working with you.
Alex Allen


Programming your door hours can be done from your remote application away or at your office. Follow these steps and it will walk you to your system.

Step 1) From Internet Browser, navigate to your Website built for you by EPS. This is generally bizname.eyeconsolutions.net. If you are unsure of your website please call your EPS contact to resend link. Select corresponding location whether you are onsite or offsite for Access Control illustrated in Figure 1.


Figure 1



Step 2) System Selection page, select ASWEB link illustrated in Figure 2.


Figure 2
*Note* If you receive a page cannot be displayed or any other type of error please add site to compatibility view. For help call and speak with EPS contact or I and we will help you add to compatibility mode or follow this link  http://windows.microsoft.com/en-us/internet-explorer/products/ie-9/features/compatibility-view for instructions.



Step 3) Login to your system. Username and password are the same as DVR if you are authorized User. Illustrated in Figure 3 If you need authorization please speak with owner or person in charge of security at your location to have account created in the AsManager System. Authorization forms will be needed, signed by Owner or known Management at your business and can be obtained by calling Technical support.


Figure 3
*Note*
Want to know if your Internet Passwords are safe?
If you would like to test your password go here.
https://www.microsoft.com/en-gb/security/pc-security/password-checker.aspx
If your password reports back "weak" please contact us and we will change it to something stronger on EPS managed services.



Step 4) When you log into your system click the "Controller List" icon. Illustrated in Figure 4


Figure 4



Step 5) After the Controller has loaded into window, select gear with pencil. A blue square will surround gear. Illustrated in Figure 5


Figure 5



Step 6) Use mouse and select door you wish to reschedule. Illustrated in Figure 6


Figure 6



Step 7) When you have selected the door you wish to change the box on right will fill with door configurations. Select "Authentication Schedule".  Illustrated in Figure 7


Figure 7



Step "8") The next screen is the time programming for the desired door. From here you will select whether you wish the doors to be "released"(unlocked) indicated with blue or "Card or Common Mode" (locked) indicated with yellow. At first it will be a little tricky, however; changes do not take effect until you click "Save". When you move the mouse over the time span you will notice a red line indicating where it is at on the schedule. Single clicking and holding down, you will be able to drag the time either way for that day. The time will display as you adjust and depending on where you are located, it may be a little slow. They are in 5 minute increments. Figure 8


Figure 8

You will have to adjust each day accordingly. To change another door just select the door you wish to change following Steps 6 though "8").


Once you have made your adjustments click save and log out, schedule has been changed. Due to the importance I highly recommend testing doors the first few times you make adjustments. Once you get the hang of it you will gain more confidence in setting the doors time.

Of course if you have any issues or problems you may call me anytime, 24/7 if needed.

Resources

Manual For the Nerdy Nerds, please note that the manual is for AsManager Version 4.2.3. This is the latest version and your system may be 1 or 2 version behind, however; the programming is pretty much the same. If you are wanting to upgrade your AsManager please call EPS technical support and we will be more than happy to upgrade remotely.

Manual download http://eyeconsolutions.com:85/eps-snapshots/ZZZ-Tutorials/AsDoorSchedule/GV-ASManager User Manual(ASMV423-A-EN).pdf

Mobile Access to control your doors, gates and other devices. Download "GV-Access V1.0" and give us a call to assist in setting up! Please remember, a user will need to be created before access to system from smart phone can happen.
http://www.geovision.com.tw/english/5_8_App.asp
« Last Edit: August 24, 2016, 09:50:00 am by Alex Allen »